Push-pull doors are very popular with owners because they do not occupy space, are easy to open and have larger lighting area. And with the improvement of people's aesthetic level, the face value of sliding doors is getting higher and higher. However, no matter how high the face value can not withstand the devastation of the years, so the maintenance of sliding doors must also be done. Today, Xiaobian brings you a practical whole of the maintenance of sliding doors. Look at how many tricks you have learned. Let's get together.

1. Cleaning Method of Push-pull Door Plate

The door panels are also the face of sliding doors. The door panels are dirty, and the face of sliding doors is naturally unpleasant. Door board cleaning is mainly to pay attention not to scratch the surface of the door board, as far as possible with soft and dry cotton or silk wipe the door board, pay attention to avoid scratching the surface of the door board. If there is a serious stain on the inner door panel, you can use neutral or special cleaning agent to clean the stain, then dry it with cotton cloth; if there is a slight scratch on the door panel, dip a small amount of toothpaste in a soft cloth and wipe it repeatedly.

2. Cleaning Method of Push-pull Door Frame

If it is a sliding door made of glass, most of the materials on the side frame are metal, so it can be wiped directly with dry cotton cloth in daily cleaning. If the edge frame of push-pull door is cleaned with water, it should be as dry as possible, so as not to cause rust or damage to the metal surface, affecting the beauty of push-pull door.

3. Cleaning Method of Push-pull Door Track

Track is the basis of sliding doors. Proper cleaning and maintenance of sliding doors rails will enhance the service life of sliding doors, so track cleaning must be attentive. The bottom rails of push-pull doors are easy to accumulate dust, which directly affects the sliding of the wheel. Therefore, it is necessary to pay attention to the frequent use of vacuum cleaners to remove the dust deposited on the bottom rails, and to clean the edges and corners with a cloth dipped in water and dry them with cotton cloth.

4. Maintenance Method of Push-pull Door Pulley

The pulley is the soul of the whole push-pull door. It can be said that the pulley figure plays a small role, but it is important. The pulley of the sliding door is divided into upper and lower wheels, while the upper and lower wheels of the brand pulley are sliding with needle roller bearings, so it is not necessary to add lubricating oil and pay attention to cleaning debris. If the pulley is maintained, the sliding part can be waxed or lubricated to keep the sliding door running smoothly.

PS: If you add lubricant, be careful not to get too much ash on the back, otherwise it will be more difficult to clean up after a long time.

5. Maintenance methods of sliding doors

As a kind of furniture which often opens and closes, the service life of the door is much lower than that of other furniture. Moreover, nowadays, in order to pursue the shape and quality of the door, it often uses the superior material, and the cost is quite high. Once something goes wrong, it's really very disturbing. At this time, it is particularly important to install a qualified door-moving buffer. As a professional buffer device, it can effectively protect the opening and closing state of the door, avoiding inadvertently causing harm to the door due to various reasons. It mainly plays the role of silencing and anti-collision of sliding doors, has high load-bearing capacity and can easily slide under high load.