The wardrobe is one of the indispensable furniture in our home life, which brings great convenience to people's lives. When the main body of the wardrobe is built, we must consider the installation of the wardrobe door. So what is the installation method of the wardrobe door? Is there anything that needs attention?

The wardrobe is one of the indispensable furniture in our home life, which brings great convenience to people's lives. When the main body of the closet is built, we must consider the installation of the closet door. So what is the installation method of the closet door? Is there anything that needs attention? Below, Xiao Qi will show you the installation step diagram of the closet door, and Everyone brings installation precautions.

First, the wardrobe door installation step diagram

1. Install on the track first. Before installation, lay the wardrobe sliding door flat, and place the track at the bottom of the sliding door in the middle of the door cover at the bottom of the sliding door.

2. Use a soft ruler to measure with a marker pen in the middle; then use the upper rail to mark out the holes that need to be fixed with screws and then drill the holes, first fix the two sides, and then fix the middle part to complete the upper rail installation.

3. When the positions on both sides are fixed, drill holes in the middle part.

4. Before installing the lower rail, wipe the door frame with a rag. The position of the lower rail is the same as the upper rail method.

5. Locate the position of the lower rail, first put the sliding door inside the lower rail, and then adjust to the best position so that the sliding door can slide freely.

6. Fix the position of the lower rail. Whether it is a new wardrobe or an old wardrobe, there will be a lot of dust during installation. At this time, use a brush to clean the inner layer of the track. Tighten all joints with a screwdriver.

7. Start sliding door installation. Lift the door slightly so that the upper pulley of the door smoothly enters the upper rail. Lift the sliding door with your left hand and press the lower pulley with your right hand, so that the lower pulley can enter the lower rail smoothly.

8. In this way, the sliding door is installed smoothly, and it is in the protection of the sliding door. The next step is to paste the anti-collision strip to protect the sliding door and prevent children from bumping.

9. The rendering of the wardrobe installation is completed. However, it is relatively difficult to put the pulley, it is better to have two people cooperate with each other to install it more easily.

2. Matters needing attention in the wardrobe door

1. The installation position of the closet door should be considered during the decoration design, and the size should be measured and reserved during the construction, and then installed after the decoration is completed. In order to ensure the overall style of the decoration design, it is best to determine the brand and style of the wardrobe door before the decoration, and be sure to ask a professional to come and measure it, otherwise it will be difficult to make up for an error of more than 5 mm.

2. Whether the wardrobe door is useful or not has a lot to do with the hardware: the upper and lower rails and the upper and lower wheels. Each time the pulley is opened, the upper and lower rails slide, so the upper and lower rails require high strength and no deformation. In addition, all the weight of the door panel is borne by the bottom wheel, and its strength and load-bearing capacity determine the life of the wardrobe door.

3. The thickness of the closet door panel is also critical. It is best to choose a 10 mm or 12 mm thick plate, which is more stable to use; too thin door panels are extremely easy to deform and difficult to meet the requirements of normal use.