Furniture slide rails, also known as furniture rails and furniture slides, belong to a kind of hardware connecting parts. The purpose of the furniture slide rail is to fix the cabinet body of the furniture, so that the cabinet board or drawer of the furniture can move in and out. Therefore, furniture slides are widely used in document cabinets, furniture, cabinets and bathroom cabinets, etc., and are mainly used for drawer connection of steel or wooden furniture. So, who are the furniture slide manufacturers?

The drawer slide rail can be divided into three parts, the outer rail, the middle rail, and the inner rail. The installation of the drawer slide rail is to pull out the inner rail first. The method of dismantling is also very simple. On the back of the drawer slide, there is a spring buckle. The inner rail can be removed with just one click. It should be noted that the middle rail and outer rail cannot be forcibly removed. Install the outer rail and middle rail of the slideway on both sides of the drawer inlay first. Install that rail on top of the drawer's side panel. If it is a finished product, the furniture needs to be punched in the finished inlay and the side panel of the drawer. After the inlays of the outer rail and the middle rail are linked, check whether the right rail is in the same horizontal position. If not, then reinstall it and balance it left and right. Then what? Install the inner and outer rails at the measured position and fix the inner rails on the cabinet with screws. Tighten the screws, but note that the inner rails on both sides are horizontal and parallel. If a jam occurs when pushing back, be sure to check whether the two positions of the inner rail and the outer rail match? Adjust until it can be pushed smoothly. Installed, what next? Pull things, try the drawer and wait for the drawer to be smooth, which means it is installed.