More and more families use sliding doors in modern homes, and in the use of the door when you find that the pulleys are too smooth and inertial push impact, will make a pop, if there are children sleeping at home is easy to be woken up by the voice, so more or less will bring some trouble to life; if you want to solve the impact sound, the best way is to install a buffer to the door, the function of the sliding door buffer The function of the buffer is to stop the noise brought by the rapid closing of the sliding door, to prevent the rapid closing of the sliding door to the side panel of the strong impact, to prevent the sliding door pinch fingers, can let the sliding door in the upcoming side panel will automatically buffer down, and then automatically slowly closed, the sliding door will not rebound.

Generally sliding door buffers are suitable for sliding doors, wardrobe sliding doors, glass sliding doors, aisle partition sliding doors and other sliding doors to buffer the closing and positioning. So the question arises, buy back the sliding door buffer will not be installed how to do? Here are the installation steps: 1. Install the guide. 2. Close the vertical frame. 3. Insert the connecting fork plate and tighten the screws. 4. Place the metal positioning card on the guide. 5. Install the buffer pulley set and tighten the screws. 6. 7. Positioning and fixing of the upper frame toggle. 8. Positioning of the screws. 9. Minimum reserved space position. 10. Installation of the complete part.

The sliding door damping buffer wheel is very easy to install, but also pay attention to the following points.

1. For different top rails, the width of the two wheels needs to be adjusted. There is a corresponding size scale on the back of the product, such as 35mm, 37.5mm, 39mm. If the width of the top rail is 35, the two pulleys need to be adjusted to the scale of 35; if the width of the top rail is 37.5, it needs to be adjusted to the scale of 37.5; if the width of the top rail is 39, it needs to be adjusted to the scale of 39. The default width of the product is 39mm.

2. If the sliding door frame adapts to the central wheel, the two fixed pieces of the sliding door buffer wheel need to be adjusted to the central position; if the sliding door frame adapts to the eccentric wheel, the two fixed pieces of the sliding door buffer wheel need to be adjusted to the eccentric N mm position. The default position of the product is the centre wheel.

3. The sliding door buffer wheel is divided into left and right, when installed, as long as the card mouth faces outward is correct.

4. A sliding door is generally installed one, against the side of the installation; if the customer needs to install both sides, a door can also be installed two. According to the needs of the customer to determine.